Products

Analog Hall Effect Sensor for Linear Magnetic Field Detection

Certifications

Analog Hall Effect Sensor for Linear Magnetic Field Detection ISO9001

All products are EU and ISO certified

Analog Hall Effect Sensor for Linear Magnetic Field Detection - IAS-H-M30SV05

Sensor Model: IAS-H-M30SV05

Technical Specifications

Parameter	Specification
Detection range	0-12.5mm
Sensitivity	≤ 1 %
Working current	≤ 35 mA
Ingress Protection	IP65
Signal output	0-5 V，5-0 V，0-10 V，10-0 V，RS485，CAN
Power Supply	DC 24V（± 10%）
Place of Origin	China
Material	Metal and Plastic
Customization	Accept customization

Products

Color Mark Sensor for Precise Color Detection in Packaging

Certifications

Color Mark Sensor for Precise Color Detection in Packaging ISO9001

All products are EU and ISO certified

Color Mark Sensor for Precise Color Detection in Packaging - IAS-CM-GN

Sensor Model: IAS-CM-GN

Technical Specifications

Parameter	Specification
Detection Distance	10mm ± 2mm
Current Consumption	≤ 45mA
Light Source Spectrum	Red, Green, Blue (optional)
Photoelectric Diameter	ψ0.5–ψ1.5
Response Time	0.1–1ms
Output Mode	Light-on, Dark-on selectable
Output Indicator	Red LED
Output Voltage	High level (≤ 1.5V), Low level (≤ 1.2V)
Power Supply	DC 10–30V (±10%)
Category	Color mark sensor
Material	Metal and Plastic
Customization	Accept customization

Products

Pin Load Sensor for Tower Crane Weighing

Certifications

Pin Load Sensor for Tower Crane Weighing ISO9001

All products are EU and ISO certified

Pin Load Sensor for Tower Crane Weighing - XCL-ZX11830-15KN-40KN

Sensor Model: XCL-ZX11830-15KN-40KN

Technical Specifications

Parameter	Specification
Measuring Range	400kN
Accuracy	0.3%
Power Supply	DC 2.5V
Sensitivity	1.5 mV/V
Output	0–3.75mV
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Fiber Optic Amplifier for Enhanced Signal Detection

Certifications

Fiber Optic Amplifier for Enhanced Signal Detection ISO9001

All products are EU and ISO certified

Fiber Optic Amplifier for Enhanced Signal Detection - IAS-O-ZD-N

Sensor Model: IAS-O-ZD-N

Technical Specifications

Parameter	Specification
Light Source	Red LED
Current Consumption	≤ 40mA
Sensitivity Adjustment	Manual fine-tuning
Control Output	Open-collector output (NPN or PNP)
Anti-light Interference	Max ambient light: 10000Lx, Incandescent lamp: 3000Lx
Enclosure Protection Rating	IP50
Place of Origin	China
Category	Fiber Amplifier
Customization	Accept customization

Products

Pin-Type Load Sensor for Axle and Force Measurement

Certifications

Pin-Type Load Sensor for Axle and Force Measurement ISO9001

All products are EU and ISO certified

Pin-Type Load Sensor for Axle and Force Measurement - XCL-YB-20

Sensor Model: XCL-YB-20

Technical Specifications

Parameter	Specification
Measuring Range	200kN (customizable)
Sensitivity	Approximately 1.5 mV/V
Protection Level	IP66
Power Supply	DC 6–12V
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Tension Sensor for Web and Wire Tension Monitoring

Certifications

Tension Sensor for Web and Wire Tension Monitoring ISO9001

All products are EU and ISO certified

Tension Sensor for Web and Wire Tension Monitoring - XCL-YB-21

Sensor Model: XCL-YB-21

Technical Specifications

Parameter	Specification
Measuring Range	1–500kN
Sensitivity	1.5 mV/V
Protection Level	IP66
Power Supply	DC 6–12V
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Anchor Force Sensor for Coal Mine Monitoring

Certifications

Anchor Force Sensor for Coal Mine Monitoring ISO9001

All products are EU and ISO certified

Anchor Force Sensor for Coal Mine Monitoring - XCL-YH-7550-400KN

Sensor Model: XCL-YH-7550-400KN

Specifications

Parameter	Specification
Measurement Range	500kg ~ 5000kg (Customizable)
Accuracy	Class 0.5 per OIML R60
Output Options	4-20mA / 0-10V / RS485 / Ethernet/IP
Power Supply	24VDC ±10% (18-36VDC Optional)
Sampling Rate	1000Hz (Anti-Aliasing Filter Included)
Operating Temperature	-40°C to +85°C (Extended Range Available)
Ingress Protection	IP68/IP69K (NEMA 6P Equivalent)
Material	17-4PH Stainless Steel w/ PEEK Coating
Calibration Cycle	5 Years (NIST Traceable)

Products

Point Machine Force Sensor for Railway Turnout Monitoring

Certifications

Point Machine Force Sensor for Railway Turnout Monitoring ISO9001

All products are EU and ISO certified

Point Machine Force Sensor for Railway Turnout Monitoring - XCL-LY-9818-10KN

Sensor Model: XCL-LY-9818-10KN

Technical Specifications

Parameter	Specification
Force Range	10kN
Accuracy	0.5%
Output Signal	1 mV/V or 4–20mA
Power Supply	DC 12V, 24V
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Load Sensor for Force Measurement and Weighing Systems

Certifications

Load Sensor for Force Measurement and Weighing Systems ISO9001

All products are EU and ISO certified

Load Sensor for Force Measurement and Weighing Systems - XCL-YB-10H

Sensor Model: XCL-YB-10H

Technical Specifications

Parameter	Specification
Measuring Range	100N, 200N, 300N, 500N
Sensitivity	1.0 ± 0.1 mV/V
Protection Level	IP66
Power Supply	DC 6–12V
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Hall Effect Switch Sensor for Magnetic Detection

Certifications

Hall Effect Switch Sensor for Magnetic Detection ISO9001

All products are EU and ISO certified

Hall Effect Switch Sensor for Magnetic Detection - IAS-H-M24JK

Sensor Model: IAS-H-M24JK

Technical Specifications

Parameter	Specification
Detection range	0-15mm
Sensitivity	± 0.05mm
Working current	≤ 20 mA
Ingress Protection	IP65
Signal output	Common Anode,Common Cathode
Power Supply	DC 24V（± 10%）
Place of Origin	China
Material	Metal and Plastic
Customization	Accept customization

Products

Monostable Hall Switch for Pulse Signal Output

Certifications

Monostable Hall Switch for Pulse Signal Output ISO9001

All products are EU and ISO certified

Monostable Hall Switch for Pulse Signal Output - PS-H-M12N23

Sensor Model: PS-H-M12N23

Technical Specifications

Parameter	Specification
Detection Range	23mm
Working Current	≤ 20mA
Load current	120mA
Ingress Protection	IP65
Output Signal	Common Anode,Common Cathode
Power Supply	DC 24V（± 10%）
Place of Origin	China
Material	Metal and Plastic
Customization	Accept customization

Products

Bistable Hall Effect Sensor for Magnetic Detection – IP67 Waterproof

Certifications

Bistable Hall Effect Sensor for Magnetic Detection – IP67 Waterproof ISO9001

All products are EU and ISO certified

Bistable Hall Effect Sensor for Magnetic Detection – IP67 Waterproof - BS-H-M12K-B

Sensor Model: BS-H-M12K-B

Technical Specifications

Parameter	Specification
Detection Range	8-15mm
Sensitivity	± 0.5mm
Working Current	≤ 20 mA
Ingress Protection	IP65
Output Signal	Common Anode,Common Cathode
Power Supply	DC 24V（± 10%）
Place of Origin	China
Material	Metal and Plastic
Customization	Accept customization

Products

Hydrogen Fuel Cell Control System for Energy Management

Certifications

Hydrogen Fuel Cell Control System for Energy Management ISO9001

All products are EU and ISO certified

Hydrogen Fuel Cell Control System for Energy Management - HEBCS-WTRE-HEBCS-WTT

Sensor Model: HEBCS-WTRE-HEBCS-WTT

Technical Specifications

Parameter	Specification
Temperature Monitoring	4-channel temperature acquisition (-40–90℃)
Pressure Monitoring	0–100MPa
Voltage Monitoring	0–120V
Current Monitoring	0–200A
Output	5 relay outputs
PWM Output	2 channels
Wireless Transmission Distance	5000m (line-of-sight, unobstructed)
Power Supply	DC 24V (±10%)
Place of Origin	China
Category	Fiber Amplifier
Customization	Accept customization

Products

Inductive Analog Sensor for Precise Distance Measurement

Certifications

Inductive Analog Sensor for Precise Distance Measurement ISO9001

All products are EU and ISO certified

Inductive Analog Sensor for Precise Distance Measurement - IAS-I-M30SV10

Sensor Model: IAS-I-M30SV10

Technical Specifications

Parameter	Specification
Detection range	0-15mm
Sensitivity	≤ 1 %
Working current	≤ 35 mA
Ingress Protection	IP65
Signal output	0-5V、5-0V、0-10V、10-0V、4-20mA
Power Supply	DC 24V（±10%）
Category	Inductive Sensor
Material	Metal and Plastic
Customization	Accept customization

Products

Inductive Ring Sensor for Metal Detection in Automation

Certifications

Inductive Ring Sensor for Metal Detection in Automation ISO9001

All products are EU and ISO certified

Inductive Ring Sensor for Metal Detection in Automation - IAS-I-A12P

Sensor Model: IAS-I-A12P

Technical Specifications

Parameter	Specification
Output Signal	PNP, NPN
Current Consumption	8mA (DC), 10mA (AC)
Load Current	300mA
Power Supply	DC 6–36V, AC 90–250V
Category	Inductive Sensor
Material	Metal and Plastic
Customization	Accept customization

Products

Wire Rope Tension Tester for Industrial Load Monitoring

Certifications

Wire Rope Tension Tester for Industrial Load Monitoring ISO9001

All products are EU and ISO certified

Wire Rope Tension Tester for Industrial Load Monitoring - WRTT-WTT

Sensor Model: WRTT-WTT

Technical Specifications

Parameter	Specification
Display	Tablet APP display
Channels	Simultaneous detection of 8 channels
Measuring Diameter	6–14mm (wire rope diameter)
Wireless Transmission Range	100m line-of-sight, point-to-point
Power Supply	Built-in lithium battery
Place of Origin	China
Category	Wire Rope Tension Tester
Customization	Accept customization

Products

Wireless Infrared Thermometer for Non-Contact Temperature MeasurementI

Certifications

Wireless Infrared Thermometer for Non-Contact Temperature MeasurementI ISO9001

All products are EU and ISO certified

Wireless Infrared Thermometer for Non-Contact Temperature MeasurementI - XWHT-II

Sensor Model: XWHT-II

Technical Specifications

Parameter	Specification
Measurement Range	-40℃ to 125℃
Measurement Error	≤ ±0.25℃
Ambient Temperature	-55℃ to 125℃
Relative Humidity	≤ 98% (at 25℃)
Wireless Frequency Band	2.4 GHz
Effective Transmission/Reception Radius	≤ 100 meters (no obstruction)
Receiver Sensitivity	≤ -70 dBm
Power Supply	DC 3.3V, rechargeable with battery indicator
Operating Current	≤ 0.03mA (3V DC), ≤ 12mA (3.6V DC during transmission/reception)
Explosion-proof Rating	EXiallBT4
Temperature Installation	Insertion type, surface mount type
Category	Wireless Thermometer
Material	Metal and Plastic
Customization	Accept customization

Products

Laser Sensor ｜ Laser diode sensors ｜Laser distance sensors for Precise Distance Measurement and Object Detection

Certifications

Laser Sensor ｜ Laser diode sensors ｜Laser distance sensors for Precise Distance Measurement and Object Detection ISO9001

All products are EU and ISO certified

Laser Sensor ｜ Laser diode sensors ｜Laser distance sensors for Precise Distance Measurement and Object Detection - IAS-JG-M18P

Sensor Model: IAS-JG-M18P

Technical Specifications

Parameter	Specification
Detection Distance	0–50 cm
Output Current	DC: 200mA, AC: 300mA
Current Consumption	DC < 15mA, AC < 10mA
Response Time	DC/AC < 2ms
Directional Angle	3º–10º
Detected Object	Opaque objects
Output Mode	NPN, PNP, Triac
Anti-light Interference	Max ambient light: 10000Lx
Enclosure Protection Rating	IP54
Place of Origin	China
Category	Laser Sensors
Customization	Accept customization

Products

Light Curtain Sensor for Safety and Object Detection

Certifications

Light Curtain Sensor for Safety and Object Detection ISO9001

All products are EU and ISO certified

Light Curtain Sensor for Safety and Object Detection - IAS-G-24V-4

Sensor Model: IAS-G-24V-4

Technical Specifications

Parameter	Specification
Detection Distance	0.5–2.5m
Static Current	≤150mA
Load Current	≤1A 120V AC / 24V DC
Light Source	Infrared LED
Response Time	≤30ms
Angle Error	0–15° (at 1 meter)
Protection Level	IP64
Output Type	Normally Open, Normally Closed
Light Interference	Ambient Light Max: 10000Lx
Power Supply	DC 24V
Category	Photoelectric switch
Material	Metal and Plastic
Customization	Accept customization

Products

Cantilever Beam Load Cell for Weighing Applications

Certifications

Cantilever Beam Load Cell for Weighing Applications ISO9001

All products are EU and ISO certified

Cantilever Beam Load Cell for Weighing Applications - XCL-YB-4

Sensor Model: XCL-YB-4

Technical Specifications

Parameter	Specification
Measuring Range	1–100kN
Sensitivity	2 ± 0.1 mV/V
Protection Level	IP66
Power Supply	DC 6–12V
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Cable Car Load Capacity Sensor for Safety Monitoring

Certifications

Cable Car Load Capacity Sensor for Safety Monitoring ISO9001

All products are EU and ISO certified

Cable Car Load Capacity Sensor for Safety Monitoring - XCL-YH-22002-100KN

Sensor Model: XCL-YH-22002-100KN

Technical Specifications

Parameter	Specification
Measuring Range	100kN
Accuracy	0.1%
Output	1–1.5mV
Power Supply	DC 6–12V
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Load Sensor for Force Measurement and Weighing Systems

Certifications

All products are EU and ISO certified

Sensor Model: XCL-YB-10H

Technical Specifications

Parameter	Specification
Measuring Range	100N, 200N, 300N, 500N
Sensitivity	1.0 ± 0.1 mV/V
Protection Level	IP66
Power Supply	DC 6–12V
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Pin Load Sensor for Tower Crane Weighing

Certifications

All products are EU and ISO certified

Sensor Model: XCL-ZX11830-15KN-40KN

Technical Specifications

Parameter	Specification
Measuring Range	400kN
Accuracy	0.3%
Power Supply	DC 2.5V
Sensitivity	1.5 mV/V
Output	0–3.75mV
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Pin-Type Load Sensor for Axle and Force Measurement

Certifications

All products are EU and ISO certified

Sensor Model: XCL-YB-20

Technical Specifications

Parameter	Specification
Measuring Range	200kN (customizable)
Sensitivity	Approximately 1.5 mV/V
Protection Level	IP66
Power Supply	DC 6–12V
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Strain Gauge Load Sensor for Force Measurement

Certifications

Strain Gauge Load Sensor for Force Measurement ISO9001

All products are EU and ISO certified

Strain Gauge Load Sensor for Force Measurement - XCL-YL-C

Sensor Model: XCL-YL-C

Technical Specifications

Parameter	Specification
Strain Range	500 microstrain
Measurement Accuracy	1% (accuracy depends on structural type)
Power Supply	DC 6–12V
Output Signal	0.8–1.2 mV/V
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Anchor Force Sensor for Coal Mine Monitoring

Certifications

All products are EU and ISO certified

Sensor Model: XCL-YH-7550-400KN

Specifications

Parameter	Specification
Measurement Range	500kg ~ 5000kg (Customizable)
Accuracy	Class 0.5 per OIML R60
Output Options	4-20mA / 0-10V / RS485 / Ethernet/IP
Power Supply	24VDC ±10% (18-36VDC Optional)
Sampling Rate	1000Hz (Anti-Aliasing Filter Included)
Operating Temperature	-40°C to +85°C (Extended Range Available)
Ingress Protection	IP68/IP69K (NEMA 6P Equivalent)
Material	17-4PH Stainless Steel w/ PEEK Coating
Calibration Cycle	5 Years (NIST Traceable)

Products

NFC Reader and Writer for Contactless Communication

Certifications

NFC Reader and Writer for Contactless Communication ISO9001

All products are EU and ISO certified

NFC Reader and Writer for Contactless Communication - IAS-NFC

Sensor Model: IAS-NFC

Technical Specifications

Parameter	Specification
Communication Distance	Approximately 4–10 cm
Power Consumption	Low power consumption
Connection Speed	Fast connection establishment, low communication delay
Protocol Compatibility	Supports ISO/IEC 14443 A/B, FeliCa, ISO/IEC 15693, and more
Data Transmission Direction	Supports two-way communication, capable of reading and writing data
Device Integration	Easy to embed in various terminal devices
Application Modes	Supports Point-to-Point (P2P), read/write, and card emulation modes
Pairing Requirements	No complex pairing needed
Category	NFC Reader/Writer
Material	Metal and Plastic
Customization	Accept customization

Products

Parking Space Weighing System for Smart Stereo Garages

Certifications

Parking Space Weighing System for Smart Stereo Garages ISO9001

All products are EU and ISO certified

Parking Space Weighing System for Smart Stereo Garages - SGWS-WTRS-SGWS-WTT

Sensor Model: SGWS-WTRS-SGWS-WTT

Technical Specifications

Parameter	Specification
Standard Configuration	1 main control unit with 8 parking control boxes, multiple sets can be used together
Current	≤ 150mA
Output	CAN, RS485, switch signal (with relay board)
Wireless Transmission Distance	600m / point-to-point line-of-sight
Power Supply	DC 24V (±10%)
Place of Origin	China
Category	Fiber Amplifier
Customization	Accept customization

Products

Diffuse Reflective Photoelectric Switch Sensor for Reliable Object Detection

Certifications

Diffuse Reflective Photoelectric Switch Sensor for Reliable Object Detection ISO9001

All products are EU and ISO certified

Diffuse Reflective Photoelectric Switch Sensor for Reliable Object Detection - IAS-OS-M18DK

Sensor Model: IAS-OS-M18DK

Technical Specifications

Parameter	Specification
Response Time	2ms
Load Current	200mA
Operating Current	≤15mA
Detected Object	Opaque Object
Protection Level	IP54
Light Interference	Ambient Light Max: 10000Lx
Output Signal	NPN (Common Cathode), PNP (Common Anode)
Power Supply	DC 10–30V, AC 90–250V
Category	Photoelectric switch
Material	Metal and Plastic
Customization	Accept customization

Products

Retro-Reflective Photoelectric Switch Sensor for Accurate Object Detection

Certifications

Retro-Reflective Photoelectric Switch Sensor for Accurate Object Detection ISO9001

All products are EU and ISO certified

Retro-Reflective Photoelectric Switch Sensor for Accurate Object Detection - IAS-OS-M17FK

Sensor Model: IAS-OS-M17FK

Technical Specifications

Parameter	Specification
Response Time	2ms
Load Current	200mA
Operating Current	DC ≤15mA, AC ≤10mA
Detected Object	Opaque Object
Protection Level	IP54
Light Interference	Ambient Light Max: 10000Lx, Halogen Lamp: 3000Lx
Output Signal	NPN (Common Cathode), PNP (Common Anode)
Power Supply	DC 10–30V, AC 90–250V
Category	Photoelectric switch
Material	Metal and Plastic
Customization	Accept customization

Products

Through-beam Photoelectric Switch Sensor for Long-range Object Detection

Certifications

Through-beam Photoelectric Switch Sensor for Long-range Object Detection ISO9001

All products are EU and ISO certified

Through-beam Photoelectric Switch Sensor for Long-range Object Detection - IAS-OS-U30RK

Sensor Model: IAS-OS-U30RK

Technical Specifications

Parameter	Specification
Response Time	2ms
Load Current	120mA
Operating Current	≤15mA
Protection Level	IP53
Light Interference	Ambient Light Max: 10000Lx
Output Signal	NPN (Common Cathode), PNP (Common Anode)
Power Supply	DC 24V (±10%)
Category	Photoelectric switch
Material	Metal and Plastic
Customization	Accept customization

Products

Back Pressure Tester Sensor for Pneumatic Systems

Certifications

Back Pressure Tester Sensor for Pneumatic Systems ISO9001

All products are EU and ISO certified

Back Pressure Tester Sensor for Pneumatic Systems - OWPTI-WTRE

Sensor Model: OWPTI-WTRE

Technical Specifications

Parameter	Specification
Measuring Range	0–25MPa
Basic Measurement Error	≤±1%
Ambient Temperature	-35℃–85℃
Relative Humidity	≤98% (at 25℃)
Power Supply	DC 5.5–15V
Operating Current	≤340mA (8.4V DC)
Battery Capacity	8.4V DC / 2600mAh
Place of Origin	China
Category	Pressure meter
Customization	Accept customization

Products

Residual Pressure Sensor for Railway Brake Systems

Certifications

Residual Pressure Sensor for Railway Brake Systems ISO9001

All products are EU and ISO certified

Residual Pressure Sensor for Railway Brake Systems - XCL-YH-6850-30KN

Sensor Model: XCL-YH-6850-30KN

Technical Specifications

Parameter	Specification
Measuring Range	30kN
Accuracy	0.05%
Output Signal	0.5–5V
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Flush Diaphragm Pressure Transmitter for Hygienic Applications

Certifications

Flush Diaphragm Pressure Transmitter for Hygienic Applications ISO9001

All products are EU and ISO certified

Flush Diaphragm Pressure Transmitter for Hygienic Applications - XCL-YB-16S

Sensor Model: XCL-YB-16S

Technical Specifications

Parameter	Specification
Measuring Range	0–250 MPa
Overall Accuracy	±0.25% FS (also available: ±0.5%, ±1.0%, ±1.5%, ±2.0% FS)
Protection Level	IP67
Output Signal	0–5V DC; 0.5–4.5V DC (3-wire voltage type); 4–20mA (2-wire current type)
Power Supply	DC 18–30V
Category	Pressure Sensors
Material	Metal and Plastic
Customization	Accept customization

Products

Pressure Transmitter for Industrial Fluid Measurement

Certifications

Pressure Transmitter for Industrial Fluid Measurement ISO9001

All products are EU and ISO certified

Pressure Transmitter for Industrial Fluid Measurement - CYYZ131-100

Sensor Model: CYYZ131-100

Technical Specifications

Parameter	Specification
Product Name	Pressure transmitter
Product Model	CYYZ131-100
Detection range	0-100 Mpa
Accuracy	± 0.5% PS
Working current	≤ 35 mA
Ingress Protection	IP65
Signal output	4-20mA ,0-5V ,0-10V ,RS485
Power Supply	DC 12-36V
Place of Origin	China
Material	Imported diffused silicon core
Customization	Accept customization

Products

Capacitive Proximity Switch for Non-Contact Object Detection

Certifications

Capacitive Proximity Switch for Non-Contact Object Detection ISO9001

All products are EU and ISO certified

Capacitive Proximity Switch for Non-Contact Object Detection - IAS-C-M30P

Sensor Model: IAS-C-M30P

Technical Specifications

Parameter	Specification
Detection range	0-15mm
Detectable body	Dielectric body
Working current	≤15mA
Ingress Protection	IP65
Signal output	PNP、NPN
Power Supply	DC 24V（±10%）
Place of Origin	China
Material	Metal and Plastic
Customization	Accept customization

Products

Rectangular Proximity Switch for Non-Contact Object Detection

Certifications

Rectangular Proximity Switch for Non-Contact Object Detection ISO9001

All products are EU and ISO certified

Rectangular Proximity Switch for Non-Contact Object Detection - IAS-H-R30JK

Sensor Model: IAS-H-R30JK

Technical Specifications

Parameter	Specification
Detection Range	8-15mm
Sensitivity	≤1.5%
Working Current	DC≤20mA
Ingress Protection	IP64
Output Signal	Common Anode,Common Cathode
Power Supply	DC 24V（±10%）
Place of Origin	China
Material	Metal and Plastic
Customization	Accept customization

Products

Point Machine Force Sensor for Railway Turnout Monitoring

Certifications

All products are EU and ISO certified

Sensor Model: XCL-LY-9818-10KN

Technical Specifications

Parameter	Specification
Force Range	10kN
Accuracy	0.5%
Output Signal	1 mV/V or 4–20mA
Power Supply	DC 12V, 24V
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Residual Pressure Sensor for Railway Brake Systems

Certifications

All products are EU and ISO certified

Sensor Model: XCL-YH-6850-30KN

Technical Specifications

Parameter	Specification
Measuring Range	30kN
Accuracy	0.05%
Output Signal	0.5–5V
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Flush Diaphragm Pressure Transmitter for Hygienic Applications

Certifications

All products are EU and ISO certified

Sensor Model: XCL-YB-16S

Technical Specifications

Parameter	Specification
Measuring Range	0–250 MPa
Overall Accuracy	±0.25% FS (also available: ±0.5%, ±1.0%, ±1.5%, ±2.0% FS)
Protection Level	IP67
Output Signal	0–5V DC; 0.5–4.5V DC (3-wire voltage type); 4–20mA (2-wire current type)
Power Supply	DC 18–30V
Category	Pressure Sensors
Material	Metal and Plastic
Customization	Accept customization

Products

Smart Pressure Sensor for Precision Monitoring

Certifications

Smart Pressure Sensor for Precision Monitoring ISO9001

All products are EU and ISO certified

Smart Pressure Sensor for Precision Monitoring - CYYZ3051-100

Sensor Model: CYYZ3051-100

Technical Specifications

Parameter	Specification
Measuring Range	0–100 MPa
Operating Current	≤35mA
Accuracy	±0.5% FS (optional: ±1.0%, ±1.5%, ±2.0% FS)
Display	LCD with broken code
Output Signal	4–20mA, 0–5V, 0–10V, RS485, Wireless Communication
Measuring Medium	Gases or liquids compatible with 304 & 316L stainless steel, fluororubber or nitrile rubber
Sensor Type	Imported diffused silicon core
Protection Level	IP65
Power Supply	DC 12–36V
Electrical Connection	M20 waterproof cable gland, M20 aviation plug (3-core/4-core)
Category	Pressure Sensors
Material	Metal and Plastic
Customization	Accept customization

Products

Speed Switch Sensor for Rotational Monitoring

Certifications

Speed Switch Sensor for Rotational Monitoring ISO9001

All products are EU and ISO certified

Speed Switch Sensor for Rotational Monitoring - IAS-I-M14J-S

Sensor Model: IAS-I-M14J-S

Technical Specifications

Parameter	Specification
Detection Material	Metal
Output Signal	Switch Type
Protection Level	IP66
Linearity	1%FS
Power Supply	DC 24V (±10%)
Category	Inductive Sensor
Material	Metal and Plastic
Customization	Accept customization

Products

Strain Gauge Load Sensor for Force Measurement

Certifications

All products are EU and ISO certified

Sensor Model: XCL-YL-C

Technical Specifications

Parameter	Specification
Strain Range	500 microstrain
Measurement Accuracy	1% (accuracy depends on structural type)
Power Supply	DC 6–12V
Output Signal	0.8–1.2 mV/V
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Wireless Infrared Thermometer for Non-Contact Temperature MeasurementI

Certifications

All products are EU and ISO certified

Sensor Model: XWHT-II

Technical Specifications

Parameter	Specification
Measurement Range	-40℃ to 125℃
Measurement Error	≤ ±0.25℃
Ambient Temperature	-55℃ to 125℃
Relative Humidity	≤ 98% (at 25℃)
Wireless Frequency Band	2.4 GHz
Effective Transmission/Reception Radius	≤ 100 meters (no obstruction)
Receiver Sensitivity	≤ -70 dBm
Power Supply	DC 3.3V, rechargeable with battery indicator
Operating Current	≤ 0.03mA (3V DC), ≤ 12mA (3.6V DC during transmission/reception)
Explosion-proof Rating	EXiallBT4
Temperature Installation	Insertion type, surface mount type
Category	Wireless Thermometer
Material	Metal and Plastic
Customization	Accept customization

Products

Wire Rope Tension Tester for Industrial Load Monitoring

Certifications

All products are EU and ISO certified

Sensor Model: WRTT-WTT

Technical Specifications

Parameter	Specification
Display	Tablet APP display
Channels	Simultaneous detection of 8 channels
Measuring Diameter	6–14mm (wire rope diameter)
Wireless Transmission Range	100m line-of-sight, point-to-point
Power Supply	Built-in lithium battery
Place of Origin	China
Category	Wire Rope Tension Tester
Customization	Accept customization

Products

Tension Sensor for Web and Wire Tension Monitoring

Certifications

All products are EU and ISO certified

Sensor Model: XCL-YB-21

Technical Specifications

Parameter	Specification
Measuring Range	1–500kN
Sensitivity	1.5 mV/V
Protection Level	IP66
Power Supply	DC 6–12V
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Cable Car Load Capacity Sensor for Safety Monitoring

Certifications

All products are EU and ISO certified

Sensor Model: XCL-YH-22002-100KN

Technical Specifications

Parameter	Specification
Measuring Range	100kN
Accuracy	0.1%
Output	1–1.5mV
Power Supply	DC 6–12V
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Ultrasonic Distance Sensor for Precise Measurement

Certifications

Ultrasonic Distance Sensor for Precise Measurement ISO9001

All products are EU and ISO certified

Ultrasonic Distance Sensor for Precise Measurement - IAS-U-8

Sensor Model: IAS-U-8

Technical Specifications

Parameter	Specification
Detection Range	0–8m
Detection Accuracy	±(1cm + S × 0.3%) (S = measured value)
Operating Temperature	-15℃ to 60℃
Relative Humidity	≤98% (at 25℃)
Power Supply	DC 4.5–5.5V
Output Signal	TTL
Category	Ultrasonic Sensors
Material	Metal and Plastic
Customization	Accept customization

Products

Cantilever Beam Load Cell for Weighing Applications

Certifications

All products are EU and ISO certified

Sensor Model: XCL-YB-4

Technical Specifications

Parameter	Specification
Measuring Range	1–100kN
Sensitivity	2 ± 0.1 mV/V
Protection Level	IP66
Power Supply	DC 6–12V
Category	Load Cell
Material	Metal and Plastic
Customization	Accept customization

Products

Parking Space Weighing System for Smart Stereo Garages

Certifications

All products are EU and ISO certified

Sensor Model: SGWS-WTRS-SGWS-WTT

Technical Specifications

Parameter	Specification
Standard Configuration	1 main control unit with 8 parking control boxes, multiple sets can be used together
Current	≤ 150mA
Output	CAN, RS485, switch signal (with relay board)
Wireless Transmission Distance	600m / point-to-point line-of-sight
Power Supply	DC 24V (±10%)
Place of Origin	China
Category	Fiber Amplifier
Customization	Accept customization

Products

Wireless Current Tester for Remote Monitoring

Certifications

Wireless Current Tester for Remote Monitoring ISO9001

All products are EU and ISO certified

Wireless Current Tester for Remote Monitoring - DLY-I

Sensor Model: DLY-I

Technical Specifications

Parameter	Specification
Measurement Range	0–50A
Measurement Error	≤ ±1% FS
Wireless Method	Zigbee
Effective Transmission/Reception Radius	≤ 100 meters (no obstruction)
Ambient Temperature	-55℃ to 125℃
Relative Humidity	≤ 98% (at 25℃)
Power Supply	DC 3.3V, rechargeable with battery indicator
Operating Current	≤ 0.03mA (3V DC), ≤ 12mA (3.6V DC during transmission/reception)
Category	Wireless Current Tester
Material	Metal and Plastic
Customization	Accept customization